Horizontal Air Handler Basic (AH-B)

The Horizontal Basic Belt-Driven Air Handler (AH-B) draw-through designs are available for either indoor or outdoor applications and are equipped with blowers that can handle up to 3.75 ESP. The AH-B is housed in heavy-gauge galvanized cabinet and insulated with ½-inch thick, over three pound, neoprene-coated fiberglass. The AH-B comes with a ½-inch OD copper tube coil, forward-curved, dynamically balanced belt-driven blowers, motor, and a galvanized steel, powder-coated epoxy drain pan insulated with ⅛-inch thick insulation.   A flat filter section, with a two-inch, 30% pleated efficiency filter is included. Access doors are located on both sides of the unit for easy maintenance. Supply and return-air openings have a one-inch duct collar.

Learn about our Dynamic Response System

An affordable and green HVAC solution

  • 200 to 1,200 CFM
  • Low-profile design is effective above drop ceilings, in closets and fits into places with tight vertical dimensions
  • Low static, direct-drive designed for jobs where low-static pressure is required
  • Blow-through design
  • Heavy-gauge galvanized steel cabinet insulated with 1/2” thick, over three-pound density, neoprene-coated fiberglass
  • Includes galvanized, bottom return-air plenum insulated with 1/2” neoprene-coated fiberglass
  • One-inch fiberglass, throwaway filter
  • Coils are manufactured of copper tube with aluminum fins and are 100% underwater pressure tested to 350 PSI with a 300 PSI working pressure
  • Three-speed, 115/1/60 motor with quick-connect plug
  • Galvanized drain pan is finished with a powder-coated epoxy, 1/8” thick insulation and features primary and secondary drain connections
  • Controls and motors are factory-wired and terminated in a junction box for single-point power supply
  • One-inch duct collar on return- and supply-air openings
  • Protective covers keep the grille openings free of debris during shipment and construction
  • Individually tagged, crated and shipped as scheduled for installation
  • ETL and AHRI certified; 100% factory tested

In any combination:

  • DX
  • Chilled-Water
  • Hot-Water
  • Electric Resistance
  • Steam
  • Thickness up to 1"
  • Fiberglass
  • Foil-face
  • Elastomeric
  • Copper fins/tubes
  • Phenolic-coated
  • Stainless-steel end plates
  • Right or left connections
  • Freeze protection
  • Custom fin spacing
  • Stainless-steel
  • Extended
  • Drip tray
  • Condensate float switch
  • Condensate pumps
  • Marine duty
  • Extensions
  • Motors
    • 115, 208, 230, 277, 460, or 575
    • Single or three phase
    • 50 or 60Hz
    • ODP (open drip proof)
    • TEFC
    • Single speed or two speed
  • Line or low voltage
  • 1 to 65 kW electric resistance heat
  • Disconnects
    • Fused
    • Non-fused
  • Condensate Float Switch
  • Condensate pumps
  • Thermostats
  • UV Light
  • Controls
  • Flow control
  • Valve package controls - wide selection of factory-mounted valves and controls
  • Mixing Box
    • Manual
    • Motorized
    • Modulating
    • 3-Position Economizer
  • Filters
    • Two-inch
    • Washable
    • Metallic
    • V-bank
  • Thermostats

Similar Products

AV-D

More Info Belt-Driven Air Handler
More...

The Vertical Deluxe Belt-Driven Air Handler (AV-D) draw-through designs are available for either indoor or outdoor applications and are equipped with a blower that can handle up to 3.75 ESP.  The AV-D is housed in heavy-gauge galvanized cabinet insulated with ½-inch thick, over three pound, neoprene-coated fiberglass and finished with a soft-white powder-coat epoxy.  The AV-D comes with a ½-inch OD copper tube coil, forward-curved, dynamically balanced belt-driven blowers, motor, and a galvanized steel, powder-coated epoxy drain pan insulated with ⅛-inch thick insulation.   A flat filter section, with a two-inch, 30% pleated efficiency filter is included.   Access doors are located on both sides of the unit for easy maintenance.   Supply and return-air openings have a one-inch duct collar.

AV-B

More Info Belt-Driven Air Handler
More...

The Vertical Basic Belt-Driven Air Handler (AV-B) draw-through designs are available for either indoor or outdoor applications and are equipped with a blower that can handle up to 3.75 ESP.  The AV-B is housed in heavy-gauge galvanized cabinet and insulated with ½-inch thick, over three pound, neoprene-coated fiberglass.  The AV-B comes with a ½-inch OD copper tube coil, forward-curved, dynamically balanced belt-driven blowers, motor, and a galvanized steel, powder-coated epoxy drain pan insulated with ⅛-inch thick insulation.   A flat filter section, with a two-inch, 30% pleated efficiency filter is included.   Access doors are located on both sides of the unit for easy maintenance.   Supply and return-air openings have a one-inch duct collar.

AH-D

More Info Belt-Driven Air Handler
More...

The Horizontal Deluxe Belt-Driven Air Handler (AH-D) draw-through designs are available for either indoor or outdoor applications and are equipped with blowers that can handle up to 3.75 ESP.  The AH-D is housed in heavy-gauge galvanized cabinet insulated with ½-inch thick, over three pound, neoprene-coated fiberglass and finished with a soft-white powder-coat epoxy.  The AH-D comes with a ½-inch OD copper tube coil, forward-curved, dynamically balanced belt-driven blowers, motor, and a galvanized steel, powder-coated epoxy drain pan insulated with ⅛-inch thick insulation.   A flat filter section, with a two-inch, 30% pleated efficiency filter is included.   Access doors are located on both sides of the unit for easy maintenance.   Supply and return-air openings have a one-inch duct collar.

AH-B

More Info Belt-Driven Air Handler
More...

The Horizontal Basic Belt-Driven Air Handler (AH-B) draw-through designs are available for either indoor or outdoor applications and are equipped with blowers that can handle up to 3.75 ESP. The AH-B is housed in heavy-gauge galvanized cabinet and insulated with ½-inch thick, over three pound, neoprene-coated fiberglass. The AH-B comes with a ½-inch OD copper tube coil, forward-curved, dynamically balanced belt-driven blowers, motor, and a galvanized steel, powder-coated epoxy drain pan insulated with ⅛-inch thick insulation.   A flat filter section, with a two-inch, 30% pleated efficiency filter is included. Access doors are located on both sides of the unit for easy maintenance. Supply and return-air openings have a one-inch duct collar.

WARNING: This product can expose you to chemicals including epichlorohydrin which is known to the State of California to cause cancer and birth defects and/or other reproductive harm. For more information go to www.p65warnings.ca.gov

TOP