- Heavy gauge galvanized steel cabinet with neoprene coated 1/2" thick fiberglass insulation with 3.35 PCF density.
- Coils are made of 1/2" OD copper tube with aluminum fins (12 FPI) equipped with manual air vent DX and steam coils do not include manual air vent. Coils are 100% underwater pressure tested at 350 PSI with a 300 PSI working pressure.
- Galvanized drain pan is powder coated epoxy and subjected to a 650 hour salt spray test in accordance test in accordance with ASTM-B117. Also comes with 1/8" thick closed cell insulation and primary and secondary Marydrain connections.
- Three-speed, 115/1/60 PSC motor with quick connect plug.
- Controls and motors are factory wired and terminated in a junction box for single point power supply.
- Easy slideout draw-through blower and motor assembly.
- One inch, reinforced duct collar on supply air openings.
- One inch fiberglass, throwaway filter, except Horizontal Basic.
- Units shall have published sound power level data tested in accordance with AHRI Standard 350-2000 (non-ducted equipment) and AHRI Standard 260- 2001 (ducted equipment).
- Protective cardboard covers openings during shipment and construction.
- Individually tagged, crated and shipped as scheduled for installation.
- ETL approved, AHRI certified, 100% factory tested.
- Soft white, powder coated epoxy cabinet that’s subjected to a 1500 hour salt spray test in accordance with ASTM-B117.
- Drain Pans - stainless steel.
- Insulation fiberglass, foil face, elastomeric and double wall separate foam insulation.
- Coils - custom tubes, phenolic coated, stainless steel end plates. All options are available on one to six rows.
- Three speed, 208-230/1/50-60 or 277/1/60 PSC motor with quick-connect plug.
- Systems - two or four pipe, hydronic cooling/heating, steam, direct expansion (DX) and/or electric heat. Steam heat. DX coating.
- Cabinet - Deluxe
- ECM™ motors; programmed 3 speed, or variable volume, 120-240/1 /60 or 277 /1 /60.
- Controls - wide selection of factory mounted valves and controls.
- Filters - two inch thick throwaway, washable, metallic and pleated.
- Flow control circulator for water heating custom applications.
- Grilles eliminate the need for closet doors, available in custom colors.
- Electric Strip Heat from 1 to 9 kW.
- Flow-Control pump for water heating applications.
- Ultraviolet lights.
- Valve package controls - wide selection of factory-mounted valves and controls
- Thermostats
- Condensate float switch
- Condensate pumps
- Pedestal base
- Supply grilles
- Single-deflection
- Double-deflection
OPTION: Provide foil faced insulation in lieu of standard.Foil insulation shall meet or exceed the requirements stated above, and in addition, meet ASTM Standards C665 and C-1136 for biological growth in insulation. Insulation shall be lined with aluminum foil, fiberglass scrim reinforcement, and 30 pound kraft paper laminated together with a flame resistant adhesive. All exposed edges shall be sealed to prevent any fibers from reaching the air stream.
OPTION: Provide elastomeric closed cell foam insulation in lieu of standard. Insulation shall conform to UL 181 for erosion and NFPA 90A for fire, smoke and melting, and comply with a 25/50 flame spread and smoke developed Index per ASTM E-84 or UL 723. Additionally, insulation shall comply with antimicrobial performance rating of zero, no observed growth, per ASTM G21. Polyethylene insulation is not acceptable.
OPTION: For exposed units, the bottom access panels shall be attached with quick open fasteners to allow for easy removal and access for service.
OPTION: For exposed units, provide double deflection discharge grille and either a rear return or bottom return single deflection grille. Supply and return duct connections are available. Unit mounting shall be by hanger and slotted hanging brackets provided at four locations. For easy installation, exposed units provided with 1/2" mounting knockouts in four places.
OPTION: Coil casing shall be fabricated from 304 stainless steel. All coils shall be provided with a manual air vent fitting to allow for coil venting.
OPTION: Provide automatic air vents in lieu of manual air vents. Cooling and heating coils shall be in the common coil casing, heating coils shall be furnished in the re-heat or pre-heat position on the unit with chilled water coils, and DX heating coil shall be in pre-heat position only.
OPTION: Provide unit with 2" pleated filters rated at 25-30% efficiency and MERV 6 based on ASHRAE 52.2 - 1999 Electrical (Option)
Units shall be furnished with single point power connection. Provide an electrical junction box with terminal strip for motor and other electrical terminations.
OPTION: The factory mounted terminal wiring strip consists of a multiple position screw terminal block to facilitate wiring terminations for the electric control valves and thermostats.
OPTION: Provide unit with 1" pleated filter (MERV 6).
OPTION: Provide a decorative stamped louver grille in the return air opening.
OPTION: Devices used to energize and de-energize (switch) fan speeds must be totally silent. Mercury and/or quiet relays and/or contractors are not acceptable.
OPTION: Devices used to energize and de-energize (switch) electric heat must be totally silent. Mercury and/ or quiet relays and/or contactors are not acceptable.
OPTION: Provide 3 wire floating point modulating control valve in lieu of standard 2 position control valve with factory assembled valve piping package.
OPTION: Provide either a fixed or adjustable flow control device for each piping package.
OPTION: Provide pressure temperature ports for each piping package. Piping packages are shipped installed on all units and can be shipped separately by request only.
More...
The Cased Vertical Basic (CV-B) is a high performance, high-static (up to .50 ESP), ducted vertical fan coil with a bottom return. Primarily used in floor-mounted or hideaway applications, the CV-B is furred into partition walls, hidden closets, or utility rooms with a ducted discharge. A removable front access panel facilitates easy servicing. The CV-B comes with comes with a coil, easy slide-out blower/motor assembly with quick-connect plug and a galvanized steel, powder-coated epoxy drain pan covered with ⅛-inch thick insulation. The galvanized steel cabinet is insulated with ½-inch thick, over three pound density, neoprene-coated fiberglass. A one-inch duct flange is standard on the top panel.
More...
The Cased Vertical Deluxe (CV-D) is a high performance, high-static (up to .50 ESP), ducted vertical fan coil with a bottom return. Primarily use in floor-mounted exposed applications the cabinet is finished in a sort-white powder-coat epoxy. A removable front access panel facilitates easy servicing. The CV-D comes with comes with a coil, easy slide-out blower/motor assembly with quick-connect plug and a galvanized steel, powder-coated epoxy drain pan covered with ⅛-inch thick insulation. The galvanized steel cabinet is insulated with ½-inch thick, over three pound density, neoprene-coated fiberglass. A one-inch duct flange is standard on the top panel.
More...
The Cased Vertical Front Return (CV-F) is a high-performance, high-static (up to .50ESP), ducted vertical fan coil for installation in a closet-type enclosure. A removable front access panel facilitates easy servicing. The CV-F comes with comes with a coil, easy slide-out blower/motor assembly with quick-connect plug and a galvanized steel, powder-coated epoxy drain pan covered with ⅛-inch thick insulation. The galvanized steel cabinet is insulated with ½-inch thick, over three pound density, neoprene-coated fiberglass. A one-inch duct flange is standard on the top panel.
More...
The Cased Vertical Front Return (CV-R) is a high performance, high-static (up to .50ESP), ducted vertical fan coil for installation in a closet-type enclosure. A removable front access panel facilitates easy servicing. The CV-R comes with comes with a coil, easy slide-out blower/motor assembly with quick-connect plug and a galvanized steel, powder-coated epoxy drain pan covered with ⅛-inch thick insulation. The galvanized steel cabinet is finished in a soft-white powder-coat epoxy and insulated with ½-inch thick, over three pound density, neoprene-coated fiberglass. A one-inch duct flange is standard on the top panel.
More...
The Cased/Closet Vertical Bottom Supply with Rear Return (CV-G) is a high performance, high-static (up to .50 ESP), ducted vertical fan coil. Primarily used in floor-mounted or hideaway applications, the CV-G is furred into partition walls, hidden closets, or utility rooms with a ducted discharge. A removable access panels facilitate easy servicing. The CV-G comes with comes with a coil, easy slide-out blower/motor assembly with quick-connect plug and a galvanized steel, powder-coated epoxy drain pan covered with ⅛-inch thick insulation. The galvanized steel cabinet is insulated with ½-inch thick, over three-pound density, neoprene-coated fiberglass. A one-inch duct flange on return- and supply-air openings is standard.
More...
The Cased Vertical Bottom Supply with Rear Return (CV-Q) is a high performance, high-static (up to .50 ESP), ducted vertical fan coil. Primarily used in floor-mounted or hideaway applications, the CV-Q is furred into partition walls, hidden closets, or utility rooms with a ducted discharge. A removable access panels facilitate easy servicing. The CV-Q comes with a coil, easy slide-out blower/motor assembly with quick-connect plug and a galvanized steel, powder-coated epoxy drain pan covered with ⅛-inch thick insulation. The galvanized steel cabinet is finished in a soft-white powder-coat epoxy and insulated with ½-inch thick, over three pound density, neoprene-coated fiberglass. A one-inch duct flange on return- and supply-air openings is standard.
More...
The Cased Vertical (CV-H) is a Heat Only model. It is a high performance, high-static (up to .50 ESP), ducted vertical fan coil for installation virtually anywhere. The front panel is removable for easy filter removal and service access to the slide-out blower, equipped with a quick–connect plug. The top discharge opening has a one- inch duct collar. This heat only version does not need a drain pan and may be installed horizontally.
More...
The Cased Vertical (CV-O) is a Heat Only model. It is a high performance, high-static (up to .50 ESP) ducted vertical fan coil for installation virtually anywhere, The front panel is removable for easy filter removal and service access to the slide-out blower, equipped with a quick-connect plug. The top discharge opening has a one-inch duct collar. This heat only version does not need a drain pan and may be installed horizontally. The CV-O is finished in a soft-white powder-coated epoxy.
WARNING: This product can expose you to chemicals including epichlorohydrin which is known to the State of California to cause cancer and birth defects and/or other reproductive harm. For more information go to www.p65warnings.ca.gov