Low-Static Horizontal Ceiling-Flush Front-Supply & Bottom or Rear Return (LH-F)

The Low-Static Horizontal Ceiling-Flush Front-Supply & Bottom or Rear Return (LH-F) is a low-static (up to .25 ESP) recessed fan coil designed for flush ceiling applications and designed to accommodate ducted supply air. The LH-F comes with a coil, blower/motor assembly with quick-connect plug and a galvanized steel, powder-coated epoxy drain pan covered with ⅛-inch thick insulation. The galvanized steel cabinet is insulated with ½-inch thick, over three pound density, neoprene-coated fiberglass. The telescoping frame and hinged access panel of the LH-F allows it to fit in any type of ceiling. The access panel and telescoping frame are finished with a durable soft-white powder-coated epoxy. This unit is easily mounted above ceilings, in closets, and in hallways.

Learn about our Dynamic Response System

An affordable and green HVAC solution

  • 200 to 1,200 CFM
  • Recessed model ideal for flush ceiling applications
  • Includes a telescoping frame and hinged access panel to accommodate many types of ceilings
  • Access panel and frame are finished with a soft-white powder-coated epoxy
  • Equipped with a front ducted supply and bottom stamped return
  • Low-profile design is effective above drop ceilings, in closets and fits into places with tight vertical dimensions
  • Low static, direct-drive designed for jobs where low-static pressure is required
  • Blow-through design
  • One-inch fiberglass, throwaway filter
  • Heavy-gauge galvanized steel cabinet insulated with 1/2" thick, over three-pound density, neoprene-coated fiberglass
  • Coils are manufactured of copper tube with aluminum fins and are 100% underwater pressure tested to 350 PSI with a 300 PSI working pressure
  • Three-speed, 115/1/60 motor with quick-connect plug
  • Galvanized drain pan is finished with a powder-coated epoxy, 1/8" thick insulation and features primary and secondary drain connections
  • Controls and motors are factory-wired and terminated in a junction box for single-point power supply
  • One-inch duct collar on return- and supply-air openings
  • Protective covers keep the grille openings free of debris during shipment and construction
  • Individually tagged, crated and shipped as scheduled for installation
  • ETL and AHRI certified; 100% factory tested

In any combination:

  • DX
  • Chilled-Water
  • Hot-Water
  • Electric Resistance
  • Steam
  • Thickness up to 1"
  • Fiberglass
  • Foil-face
  • Elastomeric
  • Copper fins/tube
  • Phenolic-coated
  • Stainless-steel end plates
  • Right, left or opposite-end connections
  • TXV - factory-mounted
  • Freeze protection
  • Custom fin spacing
  • Stainless-steel
  • Extended
  • Drip tray
  • Condensate float switch
  • Condensate pumps
  • Washable
  • Pleated
  • Marine duty
  • Custom colors
  • Motors
    • 115, 208, 277
    • Single or three phase
    • 50 or 60Hz
    • ECM
    • Line or low voltage
  • 1 to 5 kW electric resistance heat
  • Disconnects
    • Fused
    • Non-fused
  • Condensate float switch
  • Condensate pumps
  • Thermostats
  • UV Light
  • Controls
  • Flow control
  • Thermostats
  • Ultraviolet lights
  • Condensate float switch
  • Condensate pumps
  • TXV - factory-mounted
  • Controls - wide selection of factory-mounted valves and controls
  • Flow-control pump for water heating applications

Similar Products

LH-B

More Info Horizontal Ceiling Mounts
More...

The low profile and flexible design of the Horizontal Basic (LH-B), low-static (up to .25 ESP), fan coil is ideal for multiple applications. The slim compact design is well suited for drop ceilings in closets, hallways and other concealed applications. The LH-B comes with a coil, blower/motor assembly with quick-connect plug and a galvanized steel, powder-coated epoxy drain pan covered with ⅛-inch thick insulation. This model has no exterior cabinet.

LH-E

More Info Horizontal Ceiling Mounts
More...

The Horizontal Flush Bottom Supply and Return (LH-E) is a low-static (up to .25 ESP) recessed fan coil designed for flush ceiling applications. The LH-E comes with a coil, blower/motor assembly with quick-connect plug and a galvanized steel, powder-coated epoxy drain pan covered with ⅛ inch thick insulation. The galvanized steel cabinet is insulated with ½-inch thick, over three-pound density, neoprene-coated fiberglass. The telescoping frame and hinged access panel of the LH-E allows it to fit in any type of ceiling. The access panel and telescoping frame are finished with a durable soft-white powder-coated epoxy. This unit is easily mounted above ceilings, in closets and in hallways.

LH-Q

More Info Horizontal Ceiling Mounts
More...

The Bottom Air-Return Plenum Horizontal (LH-Q) is a low-static (up to .25 ESP) fan coil that comes with a coil, blower/motor assembly with quick-connect plug and a galvanized steel, powder-coated epoxy drain pan covered with ⅛-inch thick insulation. The galvanized steel plenum is insulated with ½-inch thick, over three pound density, neoprene-coated fiberglass. The plenum conceals the fan and motor assembly that is easily accessed for service by removing the back panel. This unit is easily mounted above ceilings, in closets, and in hallways.

LH-D

More Info Horizontal Ceiling Mounts
More...

The Horizontal Deluxe (LH-D), low-static (up to .25 ESP), fan coil is intended for “free-blow” exposed ceiling-mounted applications. The LH-D comes with a coil, blower/motor assembly with quick-connect plug and a galvanized steel, powder-coated epoxy drain pan covered with ⅛-inch thick insulation. Deluxe cabinets are constructed of cold-rolled galvanized steel, insulated with ½-inch, over three pound density, neoprene-coated fiberglass and finished with a soft-white powder-coat epoxy. This unit is ideal for remodels where adding ductwork is limited.

LH-F

More Info Horizontal Ceiling Mounts
More...

The Horizontal Flush Bottom Supply and Front Return (LH-F) is a low-static (up to .25 ESP) recessed fan coil designed for flush ceiling applications and designed to accommodate ducted supply air. The LH-F comes with a coil, blower/motor assembly with quick-connect plug and a galvanized steel, powder-coated epoxy drain pan covered with ⅛-inch thick insulation. The galvanized steel cabinet is insulated with ½-inch thick, over three pound density, neoprene-coated fiberglass. The telescoping frame and hinged access panel of the LH-F allows it to fit in any type of ceiling. The access panel and telescoping frame are finished with a durable soft-white powder-coated epoxy. This unit is easily mounted above ceilings, in closets, and in hallways.

LH-R

More Info Horizontal Ceiling Mounts
More...

The Horizontal Rear Return-Air Plenum, low-static (up to .25 ESP), fan coil (LH-R) comes with a coil, blower/motor assembly with quick-connect plug and a galvanized steel, powder-coated epoxy drain pan covered with ⅛-inch thick insulation. The galvanized steel plenum is insulated with ½-inch thick, over three pound density, neoprene-coated fiberglass. The plenum conceals the fan and motor assembly that is easily accessed for service by removing the bottom panel. This unit is easily mounted above ceilings, in closets, and in hallways.

WARNING: This product can expose you to chemicals including epichlorohydrin which is known to the State of California to cause cancer and birth defects and/or other reproductive harm. For more information go to www.p65warnings.ca.gov

TOP