- Heavy gauge cold-rolled steel cabinet painted in epoxy powder coated soft white paint with neoprene coated 1/2" thick fiberglass insulation with 3.35 PCF density.
- Coils are made of 1/2" OD copper tube with aluminum fins (12 FPI) equipped with manual air vent. DX and steam coils do not include manual air vent. Coils are 100% underwater pressure tested at 350 PSI with a 300 PSI working pressure.
- Galvanized drain pan is powder coated epoxy with a 1/8" thick elastomeric insulation and has a formed P-Trap drain connection.
- Controls and motors are factory-wired and terminated in a junction box for single point power supply.
- Three-speed, 115/1/60 PSC motor with quick connect plug.
- 1/2" reinforced duct collar on return air opening.
- One inch fiberglass, throwaway filter.
- Individually tagged, crated and shipped as scheduled for installation.
- Protective cardboard covers grille openings during shipment and construction.
- ETL approved, AHRI certified, 100% factory tested.
- Drain Pans - stainless steel and double wall.
- Insulation - fiberglass, foil face, elastomeric and double wall (solid or perforated) in 1/2” and 1" thicknesses.
- Coils - copper fins/tubes, stainless steel fins/tubes, phenolic coated, stainless steel end plates. All options are available on one to six rows.
- Three-speed, 208-230/1/50-60 or 277/1/60 PSC motor with quick-connect plug.
- Systems - two or four pipe, hydronic cooling/heating, steam, direct expansion (DX) and/or electric heat.
- Cabinet - enclosures; deluxe and concealed.
- Controls - wide selection of factory mounted valves and controls.
- Filters - two inch thick throwaway washable and metallic.
- ECM™ motors; programmed 3 speed, or variable volume, 120-240/1 /60 or 277 /1 /60.
- Grilles - supply and return, single and double deflection, additional openings and custom colors.
- Outside air openings - motorized and manual outside air dampers.
- Electric resistance heat from 1.0 to 7.5 kW.
- Pedestal bases, Ultraviolet lights, grills with camlocks.
- Risers and extensions available in type M, L and K copper with fiberglass, elastomeric and insulation.
- Risers on Main fan coils have a 3" long and 5/8" swaged solder joint to connect to the Secondary unit.
- Riser termination valve package.
- Valve package controls - wide selection of factory-mounted valves and controls
- Thermostat with quick connect plug.
- Manual
- Motorized
- Modulating
Full Louver Bar Style with Sound Shield
Partial Louver Bar Style with Sound Shield
Framed with Sound Shield
Louvered Pattern with Camlocks
Louver Bar Style with Camlocks
Solid Pattern with Camlocks
OPTION: Provide foil faced insulation in lieu of standard. Foil insulation shall meet or exceed the requirements stated above, and in addition, meet ASTM Standards C665 and C-1136 for biological growth in insulation. Insulation shall be lined with aluminum foil, fiberglass scrim reinforcement, and 30 pound kraft paper laminated together with a flame resistant adhesive. All exposed edges shall be sealed to prevent any fibers from reaching the air stream.
OPTION: Provide elastomeric Elastomeric foam insulation in lieu of standard. Insulation shall conform to UL 181 for erosion and NFPA 90A for fire,smoke and melting, and comply with a 25/50 Flame Spread and Smoke Developed Index per ASTM E-84 or UL 723. Additionally, insulation shall comply with Antimicrobial performance rating of zero, no observed growth, per ASTM G21. Polyethylene insulation is not acceptable.
OPTION: Provide a single wall primary drain pan constructed entirely of heavy gauge type 304 stainless steel for superior corrosion resistance. Stainless steel drain pans shall be externally insulated and meet or exceed the requirements stated above.
OPTION: Provide 3 wire floating point modulating control valve in lieu of standard 2 position control valve with factory assembled valve piping package.
OPTION: Provide either a fixed or adjustable flow control device for each piping package.
OPTION: Provide pressure temperature ports for each piping package.
OPTION: Strainer for each package. Piping packages are shipped loose on all units and can be installed by request only.
OPTION: Washable filters.
OPTION: Coil casing shall be fabricated from 304 stainless steel.
OPTION: Provide a manual air vent fitting to allow for coil venting.
OPTION: Provide a manual water drain fitting for coil draining.
OPTION: Provide automatic air vents in lieu of manual air vents.
Cooling and heating coils shall be in the common coil casing, heating coils shall be furnished in the re-heat or preheat position on the unit with chilled water coils, and DX coil shall be in preheat position only.
OPTION: Electrical junction box with multiple position ¼" spade terminal block to facilitate wiring terminations for the electric control valves
an thermostats.
OPTION: With Electric Heat, unit may be shipped loose or integrated.
OPTION: Include fusing, disconnects, sensors and switches.
More...
For concealed application virtually anywhere in the room, the Easy Riser Basic Vertical Stack (ER-B) comes standard in a heavy gauge 88" galvanized steel cabinet, insulated with 1/2" thick, neoprene coated fiberglass. This standard unit features a 1/2" OD copper tube coil, slide out blower assembly with quick disconnect plug, insulated drain pan and filter. Risers are ordered separately due to size changes throughout the building.
More...
For exposed applications along walls and in corners, the Easy Riser Deluxe Vertical Stack (ER-D) is the model of choice. In addition to the same internal features as the ER-B, the Easy Riser Deluxe comes with an epoxy, powder-coat exterior and is subjected to a 1,500-hour salt spray test in accordance with ASTM B117. When greater architectural appeal is desired, the ER-B with cabinet enclosure is the preferred choice.
More...
The Designer Riser Basic Vertical Stack (DR-B) is for concealed applications along walls and in corners. This model comes standard in an extended 97" galvanized steel cabinet, insulated with 1/2" thick neoprene coated fiberglass. Like the ER-B, this unit features a 1/2" OD copper tube coil, slide out blower assembly with quick disconnect plug, insulated drain pan and filter.
More...
The Designer Riser Deluxe Vertical Stack (DR-D) is for exposed applications also along walls and in corners. In addition to the same internal features as the DRB, the Designer Riser Deluxe’s 97" cabinet includes a epoxy, powder coat exterior and is subjected to a 1,500 hour salt spray test in accordance with ASTM B117. When greater architectural appeal is desired, the DR-B with cabinet enclosure is the preferred choice.
More...
The Easy Riser Master/Slave Vertical Stack units (ER-M and ER-S) have the same internal components as our Basic model, yet are designed to share a common riser set. The Master/Slave combination features two separate units piped to a common set of risers, each with individual valves and controls. These units come in an 88" galvanized steel cabinet.
More...
The Designer Riser Master/Slave Vertical Stack units (DR-M and DR-S) have the same internal components as our Basic model, yet are designed to share a common riser set. The Master/Slave combination features two separate units piped to a common set of risers, each with individual valves and controls. These units come in a 97" galvanized steel cabinet.
More...
The TwinPack is a master/slave combination that is pre-piped and housed in a common cabinet assembly at the factory. TwinPack Vertical Stack units include a UL 1 Hour Through Penetration Firestop W-L-7089 system. Local codes may dictate exact amount and placement of drywall. Each unit has it’s own set of valves and controls.
More...
The TwinPack is a master/slave combination that is pre-piped and housed in a common cabinet assembly at the factory. TwinPack Vertical Stack units include a UL 1 Hour Through Penetration Firestop W-L-7089 system. Local codes may dictate exact amount and placement of drywall. Each unit has it’s own set of valves and controls.
WARNING: This product can expose you to chemicals including epichlorohydrin which is known to the State of California to cause cancer and birth defects and/or other reproductive harm. For more information go to www.p65warnings.ca.gov