- Heavy gauge cold rolled steel cabinet with neoprene coated 1/2" thick fiberglass insulation with 3.35 PCF density.
- Coils are made of 1/2" OD copper tube with aluminum fins (12 FPI) equipped with manual air vent. Direct Expansion (DX) and steam coils do not include manual air vent. Coils are 100% underwater pressure tested at 350 PSI with a 300 PSI working pressure.
- Galvanized drain pan is powder coated epoxy with a 1/8" thick elastomeric insulation and has primary and secondary drain connections.
- Three speed, 115/1/60, 208/1/50-60 or 277/1/60 PSC motor with quick connect plug.
- Controls and motors are factory wired and terminated in a junction box for single point power supply.
- One inch fiberglass, throwaway filter.
- Individually tagged, crated and shipped as scheduled for installation.
- Designed to be floor or wall mounted with six mounting holes provided for wall mounting.
- ETL approved and AHRI certified.
- All exposed cabinet exterior panels shall be finished with a soft white powder coated epoxy finish.
- Drain Pans - stainless steel and double wall.
- Insulation - fiberglass, foil face, elastomeric and double wall (solid or perforated) in 1/2" and 1" thicknesses.
- Coils - copper fins/tubes, stainless steel fins/tubes, phenolic coated, stainless steel end plates. All options are available with one to five rows.
- Systems - two or four pipe, hydronic cooling/heating, steam, DX and/or electric heat.
- Cabinet - Deluxe, Front Discharge, Recessed, Slope Top and Modular.
- Cabinet and Grilles - available in custom colors.
- ECM™ motors; programmed 3 speed, or variable volume, 120-240/1 /60 or 277 /1 /60.
- Controls - unlimited selection of factory mounted valves and controls.
- Filters - washable 1" metallic.
- Flow-control circulator for water heating applications.
- Electric Strip Heat from 0.5 to 5 kW.
- Units shall have published sound power level data tested in accordance with ARI Standard 350-2000.
- Valve package controls - wide selection of factory-mounted valves and controls
- Thermostats
- Manual
- Motorized
- Modulating
- 3-Position Economizer
OPTION: Provide a 16 gauge front panel on exposed units. Slope Top and recessed units shall include a recessed stamped louver discharge grille.
OPTION: Provide an architectural grade single deflection discharge grille with a powder coated paint finish to match cabinet color.
OPTION: Provide an architectural grade bar discharge grille with a powder coated paint finish to match cabinet color.
OPTION: Provide foil faced insulation in lieu of standard. Foil faced insulation shall meet or exceed the requirements stated above, and in addition, meet ASTM Standards C-665 and C-1136 for biological growth in insulation. Insulation shall be lined with aluminum foil, fiberglass scrim reinforcement, and 30 pound kraft paper laminated together with a flame resistant adhesive. All exposed edges shall be sealed to prevent any fibers from reaching the air stream.
OPTION: Provide elastomeric Elastomeric foam insulation in lieu of standard. Insulation shall conform to UL 181 for erosion and NFPA 90A for fire, smoke and melting, and comply with a 25/50 Flame Spread and Smoke Developed Index per ASTM E-84 or UL 723. Additionally, insulation shall comply with antimicrobial performance rating of 0, no observed growth, per ASTM G-21. Polyethylene insulation is not acceptable. Unit mounting shall be to the wall through 1/2" holes in four locations in the back of the unit.
OPTION: Provide an aluminum outside air wall box with louvers and integral bug screen and weep holes for field installation as indicated in catalog.
OPTION: Provide automatic air vents in lieu of manual-air vents.
OPTION: Provide 3-wire floating point modulating control valve (fail in place) in lieu of standard 2 position control valve with factory assembled valve piping package.
OPTION: Provide high pressure close off actuator for 2 way on/off control valve. Maximum close off pressure is 75 PSIG (1/2") or 50 PSIG (3/4)". Piping packages are shipped installed on all units and can be shipped separately by request only.
OPTION: Provide a primary drain pan constructed entirely of heavy gauge type 304 stainless steel for superior corrosion resistance. Stainless steel drain pans shall be externally insulated and meet or exceed the requirements stated above.
OPTION: Devices used to energize and de-energize (switch) fan speeds must be totally silent. Mercury and/ or quiet relays and/or contactors are not acceptable.
OPTION: Devices used to energize and de-energize (switch) electric heat must be totally silent. Mercury and/ or quiet relays and/or contactors are not acceptable.
OPTION: Provide unit with 1" pleated filter (MERV 6).
OPTION: Provide a decorative stamped louver grille in the return air opening.
More...
The slim, compact design of our Vertical Basic fan coil (LB) is intended for furred in applications with a field fabricated, custom enclosure. Housed in a heavy gauge galvanized steel cabinet and insulated with ½" thick neoprene coated fiberglass, this reliable fan coil is ideal for almost any through the wall installation.
More...
Our basic unit in a soft white, powder coat epoxy finished cabinet. The Vertical Deluxe fan coil (LD) is designed for exposed wall mounting. Most commonly installed under windows, the one piece, wrap around front panel is easily removed for servicing. Filters are concealed and can be removed without the need for tools.
More...
The Vertical Slope Top (LS) is our Vertical Deluxe model, only the cabinet is designed with a full sloping top. The vertical slope top also features solid side panels so that units may be set side by side for long corridor applications. This unit is ideal for any application in which books or materials are likely to be placed over discharge grilles.
More...
The vertical wrap slope top (LW) is our standard vertical slope top, only the cabinet is designed with a wrap around front panel. The cabinet top is flat for three inches out from the wall to accommodate blinds or draperies, then gradually slopes forward. Ideal for hotel, motel and dormitory rooms, this modified cabinet still discourages items being placed over the discharge grille.
More...
Our Vertical Modular (LM) is our standard vertical slope top model with a flat top cabinet. A removable, single piece front panel provides complete access to the unit for servicing the motor, coil, valve package, drain pan, filter and all other components. The cabinet includes top discharge and front-return grilles.
More...
In a modified version of our Vertical Modular, the cabinet of the Vertical Front Discharge (LF) is designed with front discharge and return air grilles. Removable front panel below the front discharge air grille provides total access to the unit for servicing. The vertical front discharge is an attractive, exposed unit that is ideal for perimeter heating and cooling in a wide variety of building environments.
More...
Our Vertical Recessed is designed for recessed wall installation where space is limited. The design is well suited for hallways, bathrooms and other smaller areas. The Vertical Recessed has a soft white, epoxy powder coat access panel that’s easily removed for service.
More...
Designed for furred in, under the window applications, the low silhouette vertical basic (LB) stands only 15 .” high and accommodates a field furnished and installed decorative enclosure that conceals the unit. The basic unit consists of a chassis, fan deck, drain pan, throwaway filter and a top-discharge duct collar.
More...
The Low Silhouette Vertical Deluxe (LD) is similar to the Basic, only specifically designed for exposed under window applications. The attractive, streamlined cabinetry blends with any room décor and is a favorite of architects and contractors. The cabinet comes with our soft white, powder coat epoxy. Also available as Front Discharge and Recessed.
More...
The Vertical Low-Silhouette Front Discharge is a low-static (up to .25 ESP) fan coil with a blowthrough design. The LS-F fan coil comes with a coil, blower/motor assembly and a galvanized steel, powder coated epoxy drain pan covered with ⅛" thick insulation. The cabinet is insulated with ." thick neoprene coated fiberglass. The LS-F cabinet and top control access panel are finished in a soft white powder coat epoxy with black bar type front discharge and return air grilles. Freestanding at 14. inches in height.
WARNING: This product can expose you to chemicals including epichlorohydrin which is known to the State of California to cause cancer and birth defects and/or other reproductive harm. For more information go to www.p65warnings.ca.gov