Forsaire™ Counterflow Furnaces

Top-Vent Counterflow

Models require less than one square foot of floor space.  They may be recessed into the stud space or surface mounted and vented vertically through the ceiling and roof.

Direct-Vent Counterflow

The forced-air circulation comfort heating system uses only outside air for combustion, as the burners are completely sealed within the combustion chamber.  Combustion products are discharged outdoors through the wall vent.  This eliminates the expense of a vent.  All vent caps include a built-in “Bird Guard.”  All vent material is included. Ideal for garages.

Design Features

  • Freestanding or recessed, Forsaire™ furnaces are ideal for homes, apartments, offices, schools, cabins and many other applications
  • Counterflow blower system circulates ceiling-to-floor warm air
  • “Matchless” pilot igniter
  • Multi-room heating with optional outlet accessories to heat up to three rooms
  • Equipped with a four-foot service cord
  • Natural or propane models (conversion kits available)
  • Automatic temperature and safety controls
  • Resettable vent-limit safety switch (top-vent models)

Register your Williams furnace

Learn how to register here

“Matchless Pilot Igniter”
All models include a “matchless” pilot igniter. Assures convenient pilot lighting without matches.

Thermostat Sold Separately - Part number: P322016

Contemporary Finish
Soft-white, powder-coated, high-heat resistant finish to complement any décor.

Dimensions and Clearances

Top-Vent

  • 4" to an intersecting wall
  • 4" from the top of the furnace to the ceiling or overhang
  • 2" from the top of the furnace to the ceiling or overhang on 60085 Series
  • 0" to finished floor

Direct Vent

  • 4" to an intersecting wall
  • 4" from the top of the furnace to the ceiling or overhang
  • 0" to finished floor
  • 59" from the finished floor to the center line of the vent cap for Model Series 40073 and 40077
  • 68 1/2" from the finished floor to the center line of the vent cap for Model Series 55073 and 62577

Rear and Side Outlet Accessories
Allows heat to be ducted into a rear or side room.
Model 6801   Rear-Outlet Register with 10" Boot for Top-Vent Models.
Model 6802   Rear-Outlet Register with 1" Boot for Top-Vent Models.
Model 6701   Side-Outlet Register with 10" Boot for Top-Vent and Direct-Vent Models.
Model 6702   Side-Outlet Grille for Top-Vent and Direct-Vent Models.

Front Diffusing Grilles
A snap-on grille used to divert heat to the right, left or in both directions.
Model 6703   Two-Way Directional Diffuser Grille for All Models.
Model 6704   One-Way Directional Diffuser Grille for All Models.

Thermostat Kit
Note: Thermostat kits are sold separately
Part No: P322016

Venting Accessories
Model 4318   Vent Shield Deflector - Insulated, galvanized metal sheet for Direct-Vent Models.
Model 9307   Thin Wall Collar - Wall thickness from 1" to 5". Used with Direct-Vent Models.
Model 9308   Vent Cap Guard - Protects pedestrain traffic from the heat of the vent cap.
Model 9806   Direct-Vent Tube Extension - 12" Length.

Vent Finish Kit - 4" Round
Model 9904 for US, shipping weight 9 lbs.

45° Elbow - 4" Round
Model 9925 for US, shipping weight 3 lbs.

2-Foot Length of 4" Round Vent Pipe
Model 9926 for US, shipping weight 3 lbs.

4-Foot Length of 4" Round Vent Pipe
Model 9927 for US, shipping weight 5 lbs.

Universal Adapter Kit
Model 9928 for US, shipping weight 5 lbs.

Hold-Down Plate Kit
Contains hold-down plate and (2) spacers.
Model P323433, shipping weight 3 lbs.

Oval-Vent Starter Kit

Contains hold down plate, oval-to-round-adapter, spacer plates and two pieces of two-foot lengths of oval pipe.
Model 9929 for US   shipping weight 9 lbs.
Model 9930 for Canada   shipping weight 9 lbs.

 

Model 9902   Vent Adapter for top-vent, freestanding (not recessed) installations.

Trim Strip Accessory
Model 4701   Metal finishing strips painted the same color as the furnace for all models.

Top-Vent Enclosures

Used for freestanding installations. Includes two side rails and a metal cover painted soft-white to match the furnace.
Model 9812   12" Length
Model 9824   24" Length
Model 9836   36" Length

Hardwired Adapter
Model 9940   Used for wiring from a junction box rather than using the power service cord.

 

  • Read owner’s manual before using/installing.
  • Photographs are representative only.
  • Check local codes and ordinances for permitted uses.
  • Consult installation manual for clearances prior to installation.
  • We reserve the right to amend product specifications without notice.
  • Installation and servicing recommended by a qualified service person.
  • Venting must comply with the installation manual.
  • Massachusetts approval G1-0713-515.
  • Please read the warranty for any limitations or disclaimers.
  • Combustion chamber carries a ten-year limited warranty. All other parts carry a one-year limited warranty.

Similar Products

Monterey Top Vent

More Info Furnace
More...

Affordable and energy-efficient, the Monterey Home Furnace is a traditional home comfort system that delivers both quality performance and low operating costs. Recessed or surface-mounted installation. 25,000, 35,000 and 50,000 Btu/hr. sizes.

Monterey Plus Top Vent

More Info Furnace
More...

Affordable and energy-efficient, the Monterey Plus+ Home Furnaces are a traditional home comfort system that delivers both quality performance and low operating costs. Recessed or surface-mounted installation. 25,000, 35,000 and 50,000 Btu/hr. sizes.

Direct Vent

More Info Furnace
More...

Compact, space-saving furnaces featuring simple, low-cost installation. Attractive and economical, Direct-Vent furnaces are a popular choice for heating the home. 14,000, 22,000 and 30,000 Btu/hr. sizes.

High Efficiency Direct Vent

More Info Furnace
More...

A low profile furnace that may be installed nearly anywhere. Great for homes, apartments, offices, garages and room additions. Natural and Propane models. 7,400 & 17,700 Btu/hr.

Fosaire Counterflow

More Info Furnace
More...

Top-Vent Counterflow
Models require less than one square foot of floor space. They may be recessed into the stud space or surface mounted and vented vertically through the ceiling and roof.

Direct-Vent Counterflow
The forced-air circulation comfort heating system uses only outside air for combustion, as the burners are completely sealed within the combustion chamber. Combustion products are discharged outdoors through the wall vent. This eliminates the expense of a vent. All vent caps include a built-in “Bird Guard.” All vent material is included. Ideal for garages.

Electric Fosaire Counterflow

More Info Furnace
More...

Top-Vent Counterflow

Freestanding or recessed, Forsaire Electric Furnaces are ideal for homes, apartments, offices, schools cabins and many other applications.

Direct-Vent Counterflow
The forced-air circulation comfort heating system uses only outside air for combustion, as the burners are completely sealed within the combustion chamber. Combustion products are discharged outdoors through the wall vent. This eliminates the expense of a vent. All vent caps include a built-in “Bird Guard.” All vent material is included. Ideal for garages.

Vented Room Heaters

More Info Furnace
More...

Williams Vented Room Console Heaters deliver maximum efficiency, low fuel consumption and quiet operation. Enjoy instant warmth with this universal heating system. Enclosed front and glass front fireplace-look models available. 20,000, 35,000, 50,000 and 65,000 Btu/hr. sizes.

Floor Furnace

More Info Furnace
More...

A quiet, space-saving solution for large area heating requirements, the Williams Floor Furnace circulates warm air without the aid of a blower. Combustion chamber lifts out for easy servicing. 45,000 or 60,000 Btu/hr.

WARNING: This product can expose you to chemicals including epichlorohydrin which is known to the State of California to cause cancer and birth defects and/or other reproductive harm. For more information go to www.p65warnings.ca.gov

TOP