Unique Wall Mount Design
Furnaces require no floor space.
Electronic Ignition
Assures convenient pilot lighting without matches.
Requires No Electricity
Models 0743511 and 0743512 only.
Dimensions and Clearances
Models 0743511 and 0743512
- 2” to an intersecting wall
- 10” from the top of the furnace to the ceiling or overhang
- ¼” to the back wall (0” to spacers)
- 2” to finished floor
- 4 ⅛” Wall hole diameter
- 3 ⅞” Air inlet pipe diameter
- 2 ⅜” Exhaust pipe diameter
Models 1773511 and 1773512
- 3 3/16” to an intersecting wall.
- 10” from the top of the furnace to the ceiling or overhang
- 0” to the back wall
- 2” to finished floor
- 2” Wall hole diameter
- 1 ⅞” Air inlet pipe diameter
- 1 ⅜” Exhaust pipe diameter
Programmable Timer
A programmable thermostat in your home is one of the easiest ways to save energy and money. On/off, seven-day timer/clock.
Models 1773511 and 1773512
Summertime Ventilation
A two-speed recirculating fan will move the cool air off the floor and circulate it throughout your home, keeping it more comfortable.
Termination Cap (Flue)
Small, low profile termination cap goes on the exterior of the building.
Models 1773511 and 1773512
Direct-Vent Safety
For clean, comfortable heat when and where you want it. The gas flame is completely sealed inside, away from all contact with room air. Air necessary or combustion is drawn into the chamber from outside through the vent, and combustion products are vented directly to the outside. Only clean, gentle heat, in continuous circulation is delivered into the room. Windows and doors stay closed because no room air is used for combustion.
Vent Adapter
The Vent Adapter Accessory is used to compensate for the extra space left around the vent hole when replacing a furnace with a larger vent opening. It can also be used to extend the flue terminal on homes with vinyl siding so that the vent cap will be flush against the edge of the siding.
- Read owner’s manual before using/installing.
- Photographs are representative.
- Check local codes and ordinances for permitted uses.
- Consult installation manual for clearances prior to installation.
- We reserve the right to amend product specifications without notice.
- Installation and servicing recommended by a qualified service person.
- Venting must comply with the installation manual.
- Massachusetts Approval G3-0115-271.
- Please read the warranty for any limitations or disclaimers.
- Combustion chamber carries a ten-year limited warranty. All other parts carry a one-year limited warranty.
More...
Affordable and energy-efficient, the Monterey Home Furnace is a traditional home comfort system that delivers both quality performance and low operating costs. Recessed or surface-mounted installation. 25,000, 35,000 and 50,000 Btu/hr. sizes.
More...
Affordable and energy-efficient, the Monterey Plus+ Home Furnaces are a traditional home comfort system that delivers both quality performance and low operating costs. Recessed or surface-mounted installation. 25,000, 35,000 and 50,000 Btu/hr. sizes.
More...
Compact, space-saving furnaces featuring simple, low-cost installation. Attractive and economical, Direct-Vent furnaces are a popular choice for heating the home. 14,000, 22,000 and 30,000 Btu/hr. sizes.
More...
A low profile furnace that may be installed nearly anywhere. Great for homes, apartments, offices, garages and room additions. Natural and Propane models. 7,400 & 17,700 Btu/hr.
More...
Top-Vent Counterflow
Models require less than one square foot of floor space. They may be recessed into the stud space or surface mounted and vented vertically through the ceiling and roof.
Direct-Vent Counterflow
The forced-air circulation comfort heating system uses only outside air for combustion, as the burners are completely sealed within the combustion chamber. Combustion products are discharged outdoors through the wall vent. This eliminates the expense of a vent. All vent caps include a built-in “Bird Guard.” All vent material is included. Ideal for garages.
More...
Top-Vent Counterflow
Freestanding or recessed, Forsaire Electric Furnaces are ideal for homes, apartments, offices, schools cabins and many other applications.
Direct-Vent Counterflow
The forced-air circulation comfort heating system uses only outside air for combustion, as the burners are completely sealed within the combustion chamber. Combustion products are discharged outdoors through the wall vent. This eliminates the expense of a vent. All vent caps include a built-in “Bird Guard.” All vent material is included. Ideal for garages.
More...
Williams Vented Room Console Heaters deliver maximum efficiency, low fuel consumption and quiet operation. Enjoy instant warmth with this universal heating system. Enclosed front and glass front fireplace-look models available. 20,000, 35,000, 50,000 and 65,000 Btu/hr. sizes.
More...
A quiet, space-saving solution for large area heating requirements, the Williams Floor Furnace circulates warm air without the aid of a blower. Combustion chamber lifts out for easy servicing. 45,000 or 60,000 Btu/hr.
WARNING: This product can expose you to chemicals including epichlorohydrin which is known to the State of California to cause cancer and birth defects and/or other reproductive harm. For more information go to www.p65warnings.ca.gov